News

  • Maintenance of laser lens and mirrow on laser die cutting machine

    Maintenance of laser lens and mirrow on laser die cutting machine

    Laser die cutting machine is very expensive piece of equipment. It is necessary to keep the machine in good condition to prelong the machine lifespan.  When laser die cutting machine cuts materials, it produces dense smoke and even toxic air. Acrylic is extremely flammable and it is smelly during...
    Read more
  • Know more about laser die cutting machine

    Know more about laser die cutting machine

    Laser die cutting machines are designed to beas easy to use as paper printer. You just to create a design in a graphic software and then cutting it deirectly to the laser die cutting machine. Laser die cutting machines use computer operated lasera along with oxygen,nitrogen or compressed air and ...
    Read more
  • How to improve the quality of laser die

    How to improve the quality of laser die

    In these years, the competition between laser die by laser die cutter is becoming more and more fierce. Because the quality of laser die by laser die cutting machine is the basic situation that directly affects the output and cost of the product. The current economic situation is getting higher a...
    Read more
  • Laser die cutting machine for die board cutting

    Laser die cutting machine for die board cutting

    The kerf of die board which is cut by laser die cutting machine can’t be entirely 90 degrees to the die board surface. The difference is tiny, so normally you would never notice it. For die board, the edge can sometimes be very slightly angled. During laser die cutting cuts the die, the las...
    Read more
  • Laser die cutting machine for die board cutting

    Laser die cutting machine for die board cutting

    The kerf of die board which is cut by laser die cutting machine can’t be entirely 90 degrees to the die board surface. The difference is tiny, so normally you would never notice it. For die board, the edge can sometimes be very slightly angled. During laser die cutting cuts the die, the las...
    Read more
  • Laser die cutting machine for die board cutting

    The kerf of die board which is cut by laser die cutting machine can’t be entirely 90 degrees to the die board surface. The difference is tiny, so normally you would never notice it. For die board, the edge can sometimes be very slightly angled. During laser die cutting cuts the die, the las...
    Read more
  • Laser die cutting machine for die board cutting

    Laser die cutting machine for die board cutting

    The kerf of die board which is cut by laser die cutting machine can’t be entirely 90 degrees to the die board surface. The difference is tiny, so normally you would never notice it. For die board, the edge can sometimes be very slightly angled. During laser die cutting cuts the die, the las...
    Read more
  • Chinese laser die cutting machine and Western laser die cutting machine

    Chinese laser die cutting machine and Western laser die cutting machine

    To buy a co2 laser die cutting machine. Someone pay attention to the quality of the laser die cutting machine, someone care about the price of the laser die cutting machine, someone care about the service of the laser die cutting machine manufacturer, also someone care about the laser die cutting...
    Read more
  • Price estimate of laser die by laser die cutter

    Price estimate of laser die by laser die cutter

    Price estimate of laser die by laser die cutter may be as below: Laser die price = material fee + design fee + processing fee and profit + value added tax + test fee + packaging transportation fee   After the laser die by laser die cutting machine is evaluated, it cannot be directly quoted. Gener...
    Read more
  • know more about the kerf of laser dies

    know more about the kerf of laser dies

    The laser die cutting machine burns away a small part of die board when cutting through. The gap caused by the burning is called as the laser kerf. Laser die kerf width has a range from 0.45mm-1.42mm depending on what materials you are using and some conditional factors. 0.45mm is normally a kerf...
    Read more
  • The principle of coated laser tube from laser die cutter

    The principle of coated laser tube from laser die cutter

    Catalytic technology in the sealed laser tube can very effectively extend the lifespan of the laser die cutter’s tube. The service life of the un-coated catalyst is not more than 3,000 hours, and the service life of coated catalyst laser tube from laser die cutting machine is extended to more tha...
    Read more
  • Method for detecting laser tube voltage of laser die cutter

    Method for detecting laser tube voltage of laser die cutter

    If the energy of the laser tube from laser die cutting machine is reduced or there is no energy, we first check the input voltage of the laser tube and then consider other possibilities. The laser die cutter to power the laser tube under normal conditions is DC 48V. Even if the external voltage i...
    Read more
  • Why Black Edge and Laser Tails on Laser Dies?

    Why Black Edge and Laser Tails on Laser Dies?

    Laser die cutting machine is the most important automatic equipment for die making. It improves working efficiency and also improves the cutting precision compared to jigsaw machine. CO2 laser die cutting machine produces dense smoke while burning the materials. For wooden die, laser die cutting ...
    Read more
  • Cutting precision of laser die cutting machine

    Cutting precision of laser die cutting machine

    Cutting precision is an important phase of measuring the processing impact of the laser die cutting machine, but for laser die cutting machine,that different devices have different performance and may have different accuracy.  The cutting accuracy is not depend entirely on the laser die cutting m...
    Read more
  • Optical path adjustment of laser die cutting machine

    Optical path adjustment of laser die cutting machine

    The adjustment of the optical path of the laser die cutter is a basic skill that must be mastered. Only by mastering this basic skill can the laser die cutting machine be operated better and the die board kerf can be cut with good effect. The following is a brief introduction to the adjustment me...
    Read more
  • The maintenance of air compressor on the laser die cutting machine

    The maintenance of air compressor on the laser die cutting machine

    The air compressor is part of the laser die cutting machine system. Let me talk about its concept. The air compressor is the main body in the air source device. It is the device that converts the mechanical energy of the prime mover (usually the motor) into gas pressure energy. It is the air pres...
    Read more
  • Laser die cutting machine advantages

    Laser die cutting machine advantages

    Three advantages of laser die cutting machine: Automation / Precision / Flexibility   Laser die cutting machine: Automation The different from tranditional die making way, Laser die cutting machine is control by computer system, which is can reduce the skill level of the operator in the prod...
    Read more
  • The cause and solution of laser die cutter power supply’s burning

    The cause and solution of laser die cutter power supply’s burning

    There are many reasons for the power failure of the laser die cutting machine, mainly as follows 1. The laser die cutter power supply is unstable (It is best to connect a separate regulated power supply) 2. The laser die cutting machine does not have a grounding wire (the probability of burning t...
    Read more
  • If you are considering buying a laser die cutting machine

    If you are considering buying a laser die cutting machine

    If you are thinking buying a laser die cutting machine, that may many things you need to think. So what do you need to think about when you want to buy a laser die cutting machine?   1. What kind of materials that I need to be cut? This is important that you definitely need to know before you buy...
    Read more
  • Laser die cutting machine maintenance instructions

    Laser die cutting machine maintenance instructions

    Laser die cutting machine maintenance instructions:   1. Check whether the lens is clean before turning off the laser die cutter every day. If it is dirty, wipe it off in time. (Alcohol requires more than 95% of medical alcohol, and the cotton swab requires good quality to avoid scratching the le...
    Read more
  • The environmental requirement for laser die cutting machine

    The environmental requirement for laser die cutting machine

    Since power supply on laser die cutting machine is 3 phases 380V in China, the security of the laser die cutting machine is one of the most important thing. Below you will find the power supply requirements for laser die cutting machine. 1. The Grid voltage fluctuation should be controlled within...
    Read more
  • The disadvantage of the laser die cutting machine

    The disadvantage of the laser die cutting machine

    Efficiency and power consumption relies upon on the kind of area that want to be carried out and nature of the laser.The laser die cutting machine have high energy consumption.   Laser cutting of pvc board, plastic material by laser die cutting machine. Two aspect High cost:  Due to the fact whe...
    Read more
  • The power standard to be used abroad for laser die cutting machine

    The power standard to be used abroad for laser die cutting machine

    Laser die cutter is widely used to make high precision steel rule die for printing & packaging industry. When installing new laser die cutting machine, factories must consider the purchased laser die cutter meet the power standard in their local area or not. In many countries, the electricit...
    Read more
  • Laser Die Cutting Machine function Comparison

    Laser Die Cutting Machine function Comparison

    1. 300W double heads laser die cutting machine Market share: 55%( the most widely used laser die cutting machine in China. Advantages: machine cost and production cost is relatively low, easy to make maintenance. The working speed can meet mostly demands of small-middle die making shops. Disadvan...
    Read more
123456 Next > >> Page 1 / 8

INQUIRY NOW
  • * CAPTCHA: Please select the Truck